PRIMA Anesthetic Syringe, stainless steel

The PRIMA anesthesia syringe, made of stainless steel, has two tips: metric and inch screws, and three rings, with manual suction thanks to the spiral-shaped system. The syringe is used to administer local anesthesia. Instructions for use: 1. Sterilize the syringe in the autoclave and remove it from the bag after the sterilization is completed. 2. Hold the syringe in your left hand and withdraw completely the piston rod. 3. With the piston rod withdrawn, place the anesthetic cartridge in the syringe body. 4. The rubber plug must be inserted first. 5. Once the cartridge is in place, release the piston rod. 6. Engage the cartridge and the harpoon by placing moderate pressure on the ring bar with the help of your thumb. 7. Do not hold your hand on the cartridge while holding the harpoon (for safety). 8. After completing the procedure, unscrew the needle (it must have the protective cap on). 9. Retract the piston to release the harpoon from the cartridge. 10. Remove the cartridge from the syringe by pulling back the ring with the help of your thumb. 11. Throw the cartridge and needle into the sharps waste container.