Electrodes ECG/EKG and defibrillator, for adults, 2 pieces

Defibrillator electrodes, for adults, 2 pieces, are disposable, easy to use, with direct connection to cables and defibrillator. Thanks to the high-quality solid gel, the excellent adhesiveness, the special shape, the electrodes stick perfectly to the patient's skin and allocate a uniform and homogeneous distribution of the current over the entire surface of the pad. Active surface (for each electrode): 150 cm². Medical foam with a thickness of 1mm. Physical and dimensional properties: • Active surface (each pad): 76.94 cm2; • Electrode measurements: 105mm x 155mm; • Cable length: depending on the reference - minimum 1.2m. AC Impedance 10Hz: <3000Ω • AC Impedance 30kHz: <10Ω; • AC large signal impedance: <5Ω; • Defibrillation overload recovery: • After 4s: <500mV; • after 60s: <400mV; • DC offset voltage: <100Mv. Characteristics: • Support material: flexible waterproof white PE foam, closed cell, with biocompatible acrylic adhesive; • Conductive area: tin foil with conductive hydrogel based on acrylic, biocompatible; • Protective lining: PET; • Connection: • Cable: copper (65 / 0.127 mm) with non-toxic PVC coating; • Mold with plug: plastic material depending on the reference (PP, PVC). • Packaging: PET / aluminum / PE foil; • Bag size: 16 cm x 21 cm; • Multifunctional product, suitable for use in defibrillation, synchronized cardioversion and ECG monitoring; • This product does not contain natural latex, phthalates or compounds of animal or biological origin; • This product complies with the RoHS standard; • The maximum duration recommended for contact with the patient's skin is 24 hours; • Resists up to 15 consecutive defibrillation tasks at 360 J; • Product intended for adult patients. Minimum weight 10 Kg. Instructions for use: 1. The patient's skin must be clean and dry. Avoid contact with alcohol or other disinfectants. 2. Remove excess hair. 3. Open the packaging and remove the electrodes. 4. Remove the protective film from the electrodes. 5. Place the electrodes on the patient's skin, in the indicated place, making sure that the entire area with adhesive is stuck to the skin. Make sure that no air remains between the hydrogel and the patient's skin. 6. Connect the electrodes to the defibrillator or the multifunctional cable. 7. Follow the instructions of the defibrillator regarding the desired function.