Ultrasonic scaler EMS compatible
In stock
Product code 2167
Description
The P5L ultrasonic scaler has the following characteristics:
• EMS compatible;
• autoclavable parts;
• Contains: L3 LED handpiece, six handles, one torque wrench, water hose.
Instructions for use:
• Open the package and make sure all parts and accessories are complete according to the packing list. Remove the main unit from the box and place it on a stable surface.
• Turn the water control switch to the maximum base symbol as shown in the instructions.
• Insert the plug of the water pipe into the water inlet, lock the water pipe tightly with the nut, and connect the other end to the distilled water source.
• Connect the handpiece with the cable, select a descaling handle suitable for your needs, and screw it firmly into the handpiece with the torque wrench.
• Turn on the power button and turn on the device.
• Adjust the vibration according to the requirement, the degree of tartar of the patient, and his dental sensitivity
• Put the foot switch and the tip vibrates, then turn the water control switch to form a fine spray to cool the handpiece and clean the teeth.
• In clinical treatment, do not use the loop tip vertically on the tooth, so as not to destroy the teeth and the loop.
• The normal frequency is extremely high. A light touch and some straightening motion will remove tartar without heating. Overloading and prolonged persistence are prohibited.
The device has been tested and approved according to EN60601-1-2 for EMC. Specifications
Length | 26 |
---|---|
Width | 21 |
Height | 20 |
MPN | 2167 |
Add a review
Write Your Own Review